|

Calorimetry & Measuring Heat Change

Chapter 08 • Lesson 02 of 02 • Section 8.2

Measuring Heat Change in Reactions (\(Q = mc\Delta\theta\))

Grade 11 Science (English Medium) • Polystyrene Calorimeter SVG, Assumptions & Worked Numericals

1. Simple Polystyrene Cup Calorimeter & Assumptions

School Calorimeter Setup Thermometer Insulating Foam Cup
3 Standard O/L Exam Assumptions in Calorimetry:
  1. No heat is lost to (or gained from) the surroundings because the polystyrene cup and lid act as thermal insulators.
  2. Heat absorbed by the cup and thermometer is negligible compared to the aqueous solution.
  3. Dilute aqueous solutions have the same density (\(1\text{ g cm}^{-3}\)) and specific heat capacity (\(4.2\text{ J g}^{-1}\text{ }^\circ\text{C}^{-1}\)) as pure water.
\[Q = m \times c \times \Delta\theta\] Watch your units! If \(c = 4.2\text{ J g}^{-1}\text{ }^\circ\text{C}^{-1}\), substitute mass \(m\) in grams (\(\text{g}\)). If \(c = 4200\text{ J kg}^{-1}\text{ }^\circ\text{C}^{-1}\), substitute \(m\) in kilograms (\(\text{kg}\)). Both give \(Q\) in Joules (\(\text{J}\)).

Lesson 02 Model Numerical Questions & Step-by-Step Answers

Model Q1 (Dissolving an Endothermic Salt): When \(10.1\text{ g}\) of potassium nitrate (\(\text{KNO}_3\), Molar mass \(= 101\text{ g mol}^{-1}\)) is dissolved in \(90\text{ g}\) of water in a polystyrene cup, the temperature of the water drops from \(30.0^\circ\text{C}\) to \(22.0^\circ\text{C}\). Calculate (i) the heat absorbed from the solution (\(Q\)) and (ii) the molar heat of solution (\(\Delta H\)) in \(\text{kJ mol}^{-1}\).

Step-by-Step Model Answer

(i) Heat Absorbed (\(Q\)):
• Total mass of solution \(m = 10.1\text{ g} + 90\text{ g} = 100.1\text{ g}\) (or \(100\text{ g}\) if using water mass alone; check exam instructions—using total solution mass \(100\text{ g}\) for \(100\text{ cm}^3\)):
• Temperature drop \(\Delta\theta = 30.0^\circ\text{C} - 22.0^\circ\text{C} = 8.0^\circ\text{C}\).
\[Q = m c \Delta\theta = 100\text{ g} \times 4.2\text{ J g}^{-1}\text{ }^\circ\text{C}^{-1} \times 8.0^\circ\text{C} = \mathbf{3360\text{ J}} \text{ (or } 3.36\text{ kJ)}\]

(ii) Molar Enthalpy Change (\(\Delta H\)):
• Moles of \(\text{KNO}_3\) dissolved \(n = \frac{10.1\text{ g}}{101\text{ g mol}^{-1}} = 0.1\text{ mol}\).
• Because the temperature dropped, the reaction is endothermic (\(\Delta H\) is positive):
\[\Delta H = +\frac{3.36\text{ kJ}}{0.1\text{ mol}} = \mathbf{+33.6\text{ kJ mol}^{-1}}\]

Model Q2 (Concentration & Temperature Rise): In an experiment, \(50\text{ cm}^3\) of \(1\text{ mol dm}^{-3}\) \(\text{HCl}\) and \(50\text{ cm}^3\) of \(1\text{ mol dm}^{-3}\) \(\text{NaOH}\) gave a temperature rise of \(6.5^\circ\text{C}\). What temperature rise would you expect if \(50\text{ cm}^3\) of \(2\text{ mol dm}^{-3}\) \(\text{HCl}\) and \(50\text{ cm}^3\) of \(2\text{ mol dm}^{-3}\) \(\text{NaOH}\) were mixed instead?

Step-by-Step Model Answer

Doubling both concentrations doubles the number of moles reacting (\(0.1\text{ mol}\) instead of \(0.05\text{ mol}\)), so twice as much heat (\(2Q\)) is released into the same total volume (\(100\text{ cm}^3\)) of solution. Therefore, the temperature rise doubles to \(2 \times 6.5^\circ\text{C} = \mathbf{13.0^\circ\text{C}}\).

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *